Large Capacity Pouches - Which to choose?
From 3 of the top brands here at TF, we have a great selection of pouches which will be sure to fit your requirements. DiamondBack, Occidental Leather and Badger Toolbelts, offer some of the best toolbelt systems on the market.
Why would I need a large capacity pouch?
If you are completing any form of 1st fix carpentry and framing work then this style of pouch could be what you need. You will have enough room to carry things like your speed square, tape measure, other hand tools, chisels, the list is endless.
DiamondBack
The Wrangell Pouch V2.0
Available in either Black or Ranger Green. You can also pick the side of the body that you want to wear the pouch so either for the left or right hand side.
A perfect pouch for Framers or Commercial Electricians.
Features:
- Hammer Loop
- Butterfly Tool Loops
- Speed Square Slot
- Pocket Divider
- Hammer/Flat Bar Holster can be attached
The Elias Pouch V2.0
The Elias is a component that is used in The Denali 2.0 rig, and is worn on the dominant side of this set up. This pouch is unique, as it offers the most tool slots and dividers of the DiamondBack range.
You will also get the added bonus of a drill/driver attachment at the front and a hammer loop at the back.
Great for Framers!
Features:
- Hammer Loop
- External Webbing Attachment Point
- 7-Slot Tool/Bit Index
- Covered Outer Pocket
- Pocket Divider
- Hammer/Flat Bar Holster can be attached
The SxS Pouch
Based on the popular DiamondBack pouch, The Ox, The SxS has the benefits of that but with an extra outer pocket.
Features:
- Speed square slot
- Trim square slot
- Easy release tape pocket
- Hammer holster or flat bar holster compatible
The Ox Pouch V2.0
The Ox is the fraternal twin of the Mule 2.0 and also makes up half of the DiamondBack GRRande 2.0 complete system. Offering an outer pocket divider which is perfect for a trim square, Cell phone or notebook.
This is a perfect pouch for Framers, Form Carpenters, Metal Workers and Commercial Electricians.
Features:
- Easy-Release Tape Pouch
- Speed Square Slot
- Trim Square Slot
- Hammer Holster and Flat Bar Holster compatible
The Mule V2.0
Making up the dominant side of the GRRande system, this large pouch will offer ample storage for large tools and even a driver. A webbing clip has been added to the backside of the pouch for hanging DB clip-on accessories or for storing slim tools.
As with all of the DiamondBack pouches, this attaches with the hook and loop system.
Features:
- Open Mouth Pocket Design
- Hammer Loop
- 2 x Webbing Attachment Points
- 4-Slot Bit Index
- Hammer Holster or Flat Bar Holster compatible
Occidental Leather
8581 - FatLip™ Fastener Pouch
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.
Specifications:
- Pockets & Tool Holders: 10
- Weight: 1.7 lbs. , 771.1g
- Main Bag: 10" x 10" , 25.4cm x 25.4cm
- Outer Bag: 9" x 6" , 22.86cm x 15.24cm
- Upper Bag: 5" x 4.5" , 12.7cm x 11.43cm
- Not available in left hand model.
B5611 Green Building™ Fastener Pouch
This lightweight classic Black all leather fastener bag gives you the best of both worlds. Also worth noting that the Oxy Tool Shield is included in this bag.
You will be sure to get years of use out of this pouch due to the main bag being reinforced at stress points.
Specifications:
- Pockets & Tool Holders: 10
- Weight: 2.1 lbs. , 952.5g
- Main Bag: 10″w x 9″d , 25.4cm x 22.86cm
- Outer Bag: 6.5″ x 6″ , 16.51cm x 15.24cm
- Upper Bag: 4.5″ x 4″ , 11.43cm x 10.16cm
5018DB - 3 Pouch Pro Tool Bag
This is one of the most popular large capacity pouches by Occidental Leather due to the fact that it offers double outer bags and holders. Perfect for carrying pencils, your work knife, chicels, torpedo level and your hammer. There's also a holster for tapes up to a 35’ FatMax®.
Specifications:
- Pockets & Tool Holders: 11
- Weight: 2.0 lbs. , 907.2g
- Main Tool Bag: 9" x 8" , 22.86cm x 20.32cm
- Outer Bags: 5" x 5.5" , 12.7cm x 13.97cm
- Also available for left hand builders as 5018DBLH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.
Specifications:
- Pockets & Tool Holders: 13
- Weight: 1.9 lbs. , 861.8g
- Main Tool Bag: 10" x 10" , 25.4cm x 25.4cm
- Outer Bag: 6.5" x 5.5" , 16.51cm x 13.97cm
- Not available in left hand model.
This beauty offers all the features seen on the 5018DB but without the tape pocket.
Specifications:
- Pockets & Tool Holders: 10
- Weight: 1.9 lbs. , 861.8g
- Main Bag: 9" x 8" , 22.86cm x 20.32cm
- Outer Bag: 5" x 5.5" , 12.7cm x 13.97cm
- Also available for left hand builders as 5017DBLH - please contact us about this version
Badger Toolbelts
Made from heavy-duty, high denier nylon, this bag has been designed to tackle any job you need it for.
The dominant side features;
- a tape pouch
- 5 tool slots in main pouch (three along the inside back and two inside of front)
- two stacked lower pouches with a tool slot in the middle one
- rear tool loop
- a pencil/utility combo up front with three narrow slots
- one deep pocket
Plenty of room for all your tools and fasteners, cutting back on trips to refill and increasing on-the-job efficiency. This set also holds multiple bars on the non-dominate side bag.
The non-dominant side features;
- a tape pouch with 4 interior 1″ wide elastic slots
- speed square slot in main pouch with wide tool slot below
- fastener pouch with slot
- lower fastener pouch
- two front tool pockets
- 2 stacked rear tool slots
- reinforced bar sleeve on the underside of the bag.
Take a look at the full range of Large Capacity Pouches here...